Positek

E500

Part no.: E500

Key Features

• ATEX/IECEx for gas/vapor and dust.

• 0.5-9.5V or 4-20mA outputs

• ATEX variants of P502 & P505 available

• Up to 160 deg range

The intrinsically safe E500 is ATEX and IECEx approved for use in potentially explosive gas/vapour and dust atmospheres. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The E500, like all Positek sensors, is supplied with the output calibrated to the angle required by the customer, between 16 and 160 degrees and with full EMC protection built in. The sensor provides a linear output proportional with angle of rotation. There is a machined registration mark to identify the calibrated mid point. Overall performance, repeatability and stability are outstanding over a wide temperature range. The E500 has long service life and environmental resistance with a rugged stainless steel body, flange and shaft. The flange or servo mounting options make the sensor easy to install, it also offers a range of mechanical options. Environmental sealing is to IP67. Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs. The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Call us for more info at 856 727 9500

You may also be interested in:

Positek

P101 Position feedback for industrial and scientific applications

  • Body Diameter: 35mm
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 Threads Spring loaded pushrod option available
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • Sealed to IP65/67 depending on connector/cable option

Positek

P505

  • 19mm diameter body
  • Analog voltage and current outputs
  • 0.25% linearity
  • Measure up to 160 deg range

Positek

M114 ATEX & IECEx , intrinsically safe position feedback for mining applications

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threads Spring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi (for 350bar sealing see S125)

Positek

P500

  • 35mm diameter body
  • Analog voltage and current outputs
  • Up to 0.1% linearity
  • 16-160 deg range; for <16 deg see P502
Blog: