Positek

Positek P505

Part no.: Positek P505

Key Features

• 19mm diameter body

• Analog voltage and current outputs

• 0.25% linearity

• Measure up to 160 deg range

P505 with its 19mm dia body is a miniature, high accuracy rotary position sensor designed for industrial, automotive and scientific feedback applications. Like all Positek sensors the P505 is supplied with the output calibrated to the angle specified by the customer, between 15 and 160 degrees.The electronics are all fully integrated, no external signal conditioning is required. The sensor provides a linear output proportional with angle of rotation. There is a small machined registration mark to identify the calibrated mid point.

The P505 is well suited to OEMs where good sensor performance and compact housing is important.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The P505 has a anodised aluminum flange, stainless steel body and shaft for a long service life and excellent environmental resistance. The sensor is easy to install with flange or servo mounting options, it also offers a range of electrical options. Sealing is IP67 and full EMC protection built in.

Datasheet Download

Part Builder

Drawing Download

Manufacturer Website

Call us for more info at 856-727-9500

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

E114

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

M111

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

Positek P530

  • Fulll 360 degree position data
  • Analog voltage and current outputs
  • Up to 0.1% linearity
  • For smaller angles: P500 (16-160 deg), P502 (<16 deg)

Positek

G005

  •  Provides isolation between the amplifier power supply, the hazardous area and the G005 output signal
  • Input power supply range of 12 to 30 volts DC
  • Factory configured to either 0.5 to 9.5V or 4-20mA
  •  Bandwidth of 4.7kHz, making it ideal for servo control loops.
Blog:

Encoder Technology Overview

Rotary encoders are used in a variety of applications to provide feedback on position, speed, direction, or angle. There are several different encoder types…

Absolute Rotary Encoders Available with BiSS-C Interface

POSITAL’s magnetic absolute rotary encoders are now available with the BiSS-C interface. These products are available in a wide range of mechanical configurations include a 36mm…

When COTS Isn’t Enough: Why You Need a NIST 800.171 Compliant Supplier Like Everight Position

The COTS Conundrum: In today’s digital landscape, Commercial Off-the-Shelf (COTS) sensors seem like an easy button for compliances purposes. They’re readily available, cost-effective, and offer familiar functionality. But when it comes to identifying strategic suppliers, COTS alone isn’t enough.

Technical Note: Intrinsically Safe vs. Inherently Safe Sensors

Intrinsically safe (IS) sensors are designed to operate safely in hazardous areas where there is a risk of explosion. IS sensors limit the amount of electrical and thermal energy that can be released in the event of a fault, to a level below that which is capable of igniting flammable gases, vapors, or dust.

Complete Posital Product Line

Click Here

Everight Position is dedicated to helping customers find the best solution for their positioning needs.™

©2020, Everight Position  |  Terms & Conditions

Speak directly to one of our experts! We’d love to hear all about your project and determine how Everight can help.

856-727-9500

Email: info@evrtp.com