Positek

P106

Part no.: P106

Key Features

• Probe Head Diameter: 20mmElectronics Module: 35mm

• Sensor Mounting: In-cylinder

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

The P106 Inductive Linear Position Sensor is an in cylinder with external electronics. It is a highly accurate, durable and affordable position sensor designed for demanding hydraulic or pneumatic cylinder position feedback applications where environmental resistance, cost and service life are particularly important. It is particularly suited to OEM customers who require good sensor performance where the internal length or diameter is limited.

The repeatability, stability and overall performance are outstanding over a large temperature range. The P106 LIPS is very compact and space efficient, being responsive along almost its entire length.

Like all Positek sensors the P106 provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P106 is available with any travel from 0-5mm to 0-800mm, for example, if your application requires 10″” (254 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

Manufactured from stainless steel with an inert fluoropolymer sheathed probe the P106 is rugged, ideal for cylinder based applications. The probe and target are easy to install, as is the external electronics module which has a range of mounting and electrical options. Sealing to IP65 or IP67 dependent on cable or connector options and with integrated full EMC protection.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

H111

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

E130

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: In-cylinder
  • Available in any measurement range from 0-400mm to 0-1485mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

Positek P505

  • 19mm diameter body
  • Analog voltage and current outputs
  • 0.25% linearity
  • Measure up to 160 deg range

Positek

G111

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option
Blog:

Celera Motion Unveils New Ultra-Lightweight Inductive Encoder

BEDFORD, Mass. (Nov. 14, 2023) — Celera Motion, an award-winning business unit of Novanta Inc., announced today a new version of its popular ultra-lightweight IncOder CORE inductive encoder series.

The Positek LIPS Inductive Linear Sensor

While they may be small, the role of rotary encoders in spacecraft is vital, demanding a balance between performance, reliability, and the unforgiving environment of space. From NASA’s Robonaut II to automated material handling systems on the International Space Station, Everight has worked with engineers to put rotary encoders into ‘the final frontier.’

Torque Measurement with Angle Sensors

As collaborative robots expand into manufacturing environments the issue of safe motion continues to be a concern. Current design approaches involve adding force sensors, torque sensors, and sometimes proximity sensors. These adders along with more complex software control algorithms mitigate most of the concerns and result in slower operation. Unfortunately, these additional sensors also add significant cost and complexity.

MEMS Inclinometer Specifications

Inclinometers, also called tilt sensors, clinometers, or slope sensors, are designed to measure the angle of an object with respect to the force of gravity. These tilt or level meters determine the pitch and/or roll angle and output these values via the appropriate electrical interface.

Download Now

This field is for validation purposes and should be left unchanged.