Positek

S114

Part no.: S114

Key Features

• Body Diameter: 35mm

• Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

The 10bar submersible S114 is an affordable, durable, water resistant, high-accuracy position sensor. Derived from the P101, the S114 was designed for underwater marine and off-shore applications where the equipment is submerged, shares many of the desirable features such as compact size.

The S114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in. The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.

Derived from the popular P101, the S114 has been designed for applications where the sensor may be completely submerged in water up to a pressure of 10Bar, but good sensor performance and cost are still important.

This sensor is waterproof to 100m submersion.

Datasheet Download

Drawing Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

Positek S520

  • Subsea encoder to 350Bar, 5000 psi
  • Analog voltage and current outputs
  • Up to 0.1% linearity
  • Measure up to 100 deg range

Positek

M118

  • ATEX/IECEx approved for mining
  • Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
  • Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)
  • Sealed to IP67

Positek

P112

  • Body Diameter: 19mm
  • Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
  • Available in any measurement range from 0-5mm to 0-50mm
  • Sealed to IP67

Positek

E100

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: In-Cylinder Mounting
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • IP65 (connector) / IP67 (cable)
Blog:

NASA Lunabotics Challenge

Nearly fifty University Teams recently gathered in Florida for the NASA Lunabotics Challenge. The robots are tasked with driving, digging, and depositing regolith—the fragmented rock material that covers the moon’s surface—in a lunar simulant. Beyond robotics and mechatronics, the program teaches team work, project management and industry collaboration.

Understanding Inductive Rotary Encoders

While they may be small, the role of rotary encoders in spacecraft is vital, demanding a balance between performance, reliability, and the unforgiving environment of space. From NASA’s Robonaut II to automated material handling systems on the International Space Station, Everight has worked with engineers to put rotary encoders into ‘the final frontier.’

Understanding Hazardous Location Classifications

Properly understanding hazardous location classifications is vital for ensuring safety in dangerous environments. This blog provides a comprehensive guide to these classifications and their importance.

Everight Position’s Submersible Sensors for UUVs

While they may be small, the role of rotary encoders in spacecraft is vital, demanding a balance between performance, reliability, and the unforgiving environment of space. From NASA’s Robonaut II to automated material handling systems on the International Space Station, Everight has worked with engineers to put rotary encoders into ‘the final frontier.’

Download Now

This field is for validation purposes and should be left unchanged.