Positek

G114

Part no.: G114

Key Features

• CSA approved to: Class I, Zone 0

• Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

The intrinsically safe 10 bar G114 is an CSA approved affordable, durable, high-accuracy position sensor.

The G114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in. The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Derived from the popular G101, the G114 has been designed for applications where the sensor may be completely submerged in water up to a pressure of 10Bar, but good sensor performance and cost are still important.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Manufacturer Website

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

G133

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
  • Available in any measurement range from 0-51mm to 0-100mm(for 2-50mm range see P103)
  • Sealed to IP65/67 depending on connector/cable option

Positek

M111

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

G603

  • Single axis
  • Voltage or Current interface
  • IP67

Positek

H115

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800m
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)
Blog:

MEMS Inclinometer Specifications

Inclinometers, also called tilt sensors, clinometers, or slope sensors, are designed to measure the angle of an object with respect to the force of gravity. These tilt or level meters determine the pitch and/or roll angle and output these values via the appropriate electrical interface.

Improved Encoder Accuracy Brings Hidden Benefits

Capacitive rotary encoders such as those from Netzer Precision are known for their low profile, high noise immunity and excellent accuracy. As a result, they are an excellent choice for applications such as camera systems, radar, slip-rings and robotic joints. Often times in these tasks the encoder is used for velocity feedback, ensuring a smooth […]

NetzerUSA.com – Your Resource for Innovative Rotary Encoders

Everight Position, a leading resource for rotary encoders is excited to announce the launching of NetzerUSA.com , an online resource dedicated to empowering control engineers in the United States.

When COTS Isn’t Enough: Why You Need a NIST 800.171 Compliant Supplier Like Everight Position

The COTS Conundrum: In today’s digital landscape, Commercial Off-the-Shelf (COTS) sensors seem like an easy button for compliances purposes. They’re readily available, cost-effective, and offer familiar functionality. But when it comes to identifying strategic suppliers, COTS alone isn’t enough.

Download Now

This field is for validation purposes and should be left unchanged.