Positek

P103

Part no.: P103

Key Features

• Body Diameter: 35mm

• Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available

• Available in any measurement range from  0-2mm to 0-50mm (for 51-100mm range see P133)

• Sealed to IP65/67 depending on connector/cable option

The P103 is a durable, affordable, high accuracy short stroke linear inductive position sensor designed for use in industrial and scientific applications. It is very compact and offers an excellent stroke to overall length ratio. Each unit is supplied calibrated to the exact travel required by the customer, for example, if your application requires 1″” (25 mm) measurement then Positek will manufacture the sensor specifically for this length.The mechanical length and calibration will be set up for 25mm. The P103 is available with any travel from 0-2mm to 0-50mm.

The overall performance, repeat-ability and stability are outstanding over a wide temperature range. The sensor has a rugged stainless steel body and plunger.
The P103 sensor is particularly easy to install with either flanged housing or body clamps. The plunger can be supplied captive or free with either female M4 thread or spring loaded with dome end. The P103 is available with a wide range of electrical inputs/outputs, sealing up to IP65/IP67 dependent on connector/cable options and fully integrated EMC protection.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

E101

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • Sealed to IP65/67 depending on connector/cable option

Positek

E603

  • Single axis
  • Up to 160°
  • Voltage or Current interface
  • IP67

Positek

H130

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: In-cylinder
  • Available in any measurement range from 0-400mm to 0-1485mm
  • Sealed to IP65/67 depending on connector/cable option

Positek

M117

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-350mm
  • Sealed to IP67
Blog:

Potentiometers That Make Sense for Sensing

Despite their perceived simplicity, potentiometers can still be an appropriate option in today’s ever-complicated automation industry. Fundamentally a variable resistor, modern potentiometers also offer more traditional outputs such as voltage and current which are common to more expensive sensors.

A Comparison of LVIT & LVDT- Which Linear Sensor is Best?

With the increasing sophistication of electronic controls for mechanical systems, there is more demand for durable, accurate and easy to use displacement sensors. As automation becomes more common there is also an increasing sensitivity to price. Customers also want sensors that can be easily connected and mechanically integrated.

The NEXTGen CANopen inclinometers

The NEXTGen CANopen inclinometers are available now! POSITAL has updated its family of TILTIX inclinometers with new three-axis MEMS accelerometers, enhanced firmware, and a new housing concept.

Selecting the Right Sensors for Hazardous Environments

Choosing the right sensors for hazardous environments is essential for ensuring safety and operational efficiency. This blog explores key considerations for sensor selection, the role of safety engineers, and an overview of Everight Position’s sensor solutions.

Download Now

This field is for validation purposes and should be left unchanged.