Positek

P118

Part no.: P118

Key Features

• Body Diameter: 19mm

• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available

• Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)

• Sealed to IP67

The P118 with its compact 19 mm diameter stainless steel body is an affordable, durable, accurate position sensor designed for a wide range of industrial applications. It is particularly suitable for OEMs seeking good sensor performance in situations where a small diameter, short-bodied sensor is needed and cost is important. The unit is compact and space-efficient, being responsive along almost its entire length, and like all Positek® sensors provides a linear output proportional to displacement.

Each unit is supplied with the output calibrated to the travel required by the customer, from 0-2mm to 0-50mm and with full EMC protection built in.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install and set up. Mounting options include body clamps or a stainless steel mounting flange with two 3.2 mm by 30 degree wide slots on a 25 mm pitch. The stainless steel plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The P118 also offers a range of mechanical options, environmental sealing is to IP67.

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

P100

  • Body Diameter: 35mm
  • Sensor Mounting: In-Cylinder Mounting
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • IP65 (connector) / IP67 (cable)

Positek

E114

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

Positek G500

  • CSA rated for gas/vapor
  • 0.5-9.5V or 4-20mA outputs
  • ATEX variants of P502, P505 and P520 available
  • Up to 160 deg range

Positek

G111

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option
Blog:

Osico Oil-Mon: The Ultimate Oil Quality Sensor for Real-Time Monitoring

In the world of industrial machinery and high-tech equipment, maintaining optimal lubrication is not just a matter of efficiency—it’s a necessity for reliability and longevity. Particle contamination, water intrusion, and oxidation can transform lube oil from a machine’s lifeblood into its most insidious foe. While periodic lab analyses provide snapshots of oil health, imagine the possibilities if these critical parameters could be monitored continuously, in real time.

NASA Lunabotics Challenge

Nearly fifty University Teams recently gathered in Florida for the NASA Lunabotics Challenge. The robots are tasked with driving, digging, and depositing regolith—the fragmented rock material that covers the moon’s surface—in a lunar simulant. Beyond robotics and mechatronics, the program teaches team work, project management and industry collaboration.

SSI Encoder

Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications between a master (i.g. controller) and a slave (i.g. sensor).

Mass Customization: Saving Money in the Long Run

In today’s competitive market, businesses strive to meet the diverse needs and preferences of their customers. One approach gaining traction is mass customization – the ability to tailor products and services to individual customer requirements while maintaining efficiency in production.

Download Now

This field is for validation purposes and should be left unchanged.