Positek

H112

Part no.: H112

Key Features

• CSA approved to: Class I, Zone 0

• Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger

• Available in any measurement range from 0-5mm to 0-50mm

• Sealed to IP67

The intrinsically safe H112 is CSA approved for use in potentially explosive gas/vapour and dust atmospheres. It is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The H112, like all Positek sensors, provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-50mm and with full EMC protection built in.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is very robust, the body and plunger being made of stainless steel for long service life and environmental resistance.

The plunger is spring loaded with a domed end. The H112 is easy to install with a long ½ inch UNF mounting thread and is supplied with two lock nuts for positioning. Environmental sealing is to IP67.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

X118

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
  • Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)
  • Sealed to IP67

Positek

M115

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800m
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

H103

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
  • Available in any measurement range from  0-2mm to 0-50mm (for 51-100mm range see P133)
  • Sealed to IP65/67 depending on connector/cable option

Positek

H111

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option
Blog:

Safety First – Selecting the Right Position Sensors for Safety-Related Motion Control

POSITAL has introduced an inexpensive and flexible alternative for safety-critical motion control systems. When combined with functional safety PLCs, these devices are suitable for applications that are required to conform to Performance Level/ PL d, Cat. 3, according to ISO 13849.

Exploring Magnetic Rotary Encoders: TMR and Hall Effect Technologies

While they may be small, the role of rotary encoders in spacecraft is vital, demanding a balance between performance, reliability, and the unforgiving environment of space. From NASA’s Robonaut II to automated material handling systems on the International Space Station, Everight has worked with engineers to put rotary encoders into ‘the final frontier.’

When COTS Isn’t Enough: Why You Need a NIST 800.171 Compliant Supplier Like Everight Position

The COTS Conundrum: In today’s digital landscape, Commercial Off-the-Shelf (COTS) sensors seem like an easy button for compliances purposes. They’re readily available, cost-effective, and offer familiar functionality. But when it comes to identifying strategic suppliers, COTS alone isn’t enough.

Expanded VLP Encoder Series Offers Control Engineers New Sensing Options

Everight Position is pleased to announce the addition of four new sizes of Netzer’s two-plate VLP rotary encoder amongst other improvements. Based on the success of the VLP-60 and VLP-100, the new options include the VLP-80, VLP-140, VLP-170 and VLP-247.

Download Now

This field is for validation purposes and should be left unchanged.