Micronor

Micronor MR430 Fiber Optic Encoder

Part no.: Micronor MR430 Fiber Optic Encoder

Key Features

• 100% passive sensing design – no electronics whatsoever

• Linear and rotary sensor configurations

• Sensor can be installed in all manner of hazardous locations and potentially explosive atmospheres

• Immune to EMI and RFI

The MR430 series ZapFREE® Fiber Optic Position Sensor is a small form factor, rotary position sensor with 13-bit, single-turn resolution.
The MR430 features an innovative design which enables new applications and OEM product features not formerly possible with electronics-based sensors.
The sensor is 100% passive and is unaffected by EMI, RFI, microwaves and magnetic fields. The innovative, alldielectric design also provides 100% electrical isolation and immunity to high voltages & lightning.

Datasheet 3 Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Micronor

MR343 MRI Safe Incremental Linear Sensor

  • Non-metallic construction makes the sensor entirely MRI safe
  • 0.1 mm positional resolution
  • Inherently Safe, Simple Mechanical Device
  • Immune to EMI and RFI

Micronor

MR342 Incremental Fiber Optic Encoder

  • 100% passive sensing design – no electronics whatsoever
  • Linear and rotary sensor configurations
  • Sensor can be installed in all manner of hazardous locations and potentially explosive atmospheres
  • Immune to EMI and RFI

Micronor

MR344 Hollow Shaft Incremental Fiber Optic Encoder

  • 100% passive sensing design – no electronics whatsoever
  • Up to 1.25" through hollow design
  • Sensor can be installed in all manner of hazardous locations and potentially explosive atmospheres
  • Immune to EMI and RFI

Micronor

MR348 MRI-Safe Rotary Incremental Encoder

  • 100% passive sensing design – no electronics whatsoever
  • Up to 1.25" through hollow design
  • Sensor can be installed in all manner of hazardous locations and potentially explosive atmospheres
  • Immune to EMI and RFI
Blog:

Liquid Level Sensor Interface

Enhancing Precision in Liquid Level Measurement with GS Liquid Level Software Introduction Accurate liquid level sensing is an important parameter in many processes, such as those involving specific gravity and identifying emulsion layers. The GS Liquid Level software, designed to work seamlessly with Gill Liquid Level sensors, is a revolutionary tool for engineers and system […]

Chips, Chips & Chips

What semiconductors, snacking and gambling all have in common: Encoders!

There has been a lot of talk lately around the global ‘chip’ shortage. Even social media last month was filled with cartoons of engineers asking Santa for semiconductors for Christmas. Rotary encoders such as the DS-130 by Netzer Precision are an important part of this ‘chip’ production. Accuracies exceeding 0.004 degrees, 21 bit resolution and a 90mm ID ensure that component placement can be done accurately and consistently.

Technical Note: Intrinsically Safe vs. Inherently Safe Sensors

Intrinsically safe (IS) sensors are designed to operate safely in hazardous areas where there is a risk of explosion. IS sensors limit the amount of electrical and thermal energy that can be released in the event of a fault, to a level below that which is capable of igniting flammable gases, vapors, or dust.

How-to: 2 Point Operation of an Open Collector Switch Output

In this example, the switch point has been set to ‘Full Alarm’. By setting the switch point to 90% with an 80% hysteresis, the switch will come on at 90% and switch off at 10%.

Download Now

This field is for validation purposes and should be left unchanged.