Positek

P117

Part no.: P117

Key Features

• Body Diameter: 19mm

• Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-350mm

• Sealed to IP67

The P117 is is very space efficient and compact with its 19mm body diameter. Affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The repeatability, overall performance and stability are excellent over a large temperature range. The P117 is housed within a stainless steel body tube and has a 3/8″” stainless steel push rod.

Various mounting options are available including M5 male stud and M5 rod eye bearing. The push rod can be supplied free or captive with M5 male thread or M5 rod eye. Like all Positek products the P117 provides a linear output proportional to the displacement. Each unit is supplied calibrated to the customers exact requirement, from 0-5mm to 0-350mm and with full EMC protection built in. For example, if your application requires 3/4″” (19 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 19 mm.
The P117 is sealed to IP67 . The sensor has fully integrated EMC protection.

Call us for more info at 856-727-9500

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

X112

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
  • Available in any measurement range from 0-5mm to 0-50mm
  • Sealed to IP67

Positek

E115

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800m
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

X101

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • Sealed to IP65/67 depending on connector/cable option

Positek

H100

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: In-Cylinder Mounting
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • IP65 (connector) / IP67 (cable)
Blog:

Compact, Lightweight, Inductive Ring Encoders

Compact, Lightweight, Inductive Ring Encoders Discover the IncOder™ CORE IncOder™ CORE is a robust miniature PCB-based inductive ring encoder designed specifically for robotic joints. Its advanced design offers several benefits that make it an ideal choice for various applications. Key Features of IncOder™ CORE Lightweight and Non-Contact Design IncOder CORE is a non-contact, lightweight absolute […]

Dynamic Inclinometers

For applications where sudden movements, shocks, and vibrations are likely to be encountered, it is important to have sensors with fast response and a clean signal output. POSITAL’s dynamic inclinometers combine two measurement principles using two different MEMS sensors: a 3D acceleration sensor and a 3D gyroscope.

Implementation of SSI Interface

Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications especially, rotary encoders. It is a point-to-point connection from a master (e.g. PLC, microcontroller or other control systems) to a slave (e.g. the rotary encoder).

POSITAL UCD…H200 Through-hole Encoder

Over the past 15 years Everight Position has worked with a lot of unique sensors. But one of our favorites is the POSITAL UCD…H200. When looking back there are two things that make this sensor so special.

Download Now

This field is for validation purposes and should be left unchanged.