POSITAL

LD0-A

Part no.: LD0-A

Key Features

• Compact housing

• Voltage and Current (4-20mA) output options

• 1m to 30m measurement range options

• IP65

POSITAL’s LINARIX draw wire sensors measure linear motion by displacing a stainless steel wire wound around a wire drum that actuates the rotary encoder coupled to it via coupling. A spring is used to retract the wire in the housing. The encoder provides a proportional output. Measurements are highly accurate, reliable and the systems have very long lifetime

The LINARIX line offers a wide range of measurement lengths ranging from 1 m to 30 m [3 to 98 ft] and position output is given as an analog voltage or current signal. Furthermore the output can be scaled over the specific range of interest without any special programming or tools, optimizing the dynamic range. LINARIX products are available with different mechanical options, housing materials and springs to enable you to always find the most suitable product for your application

Compared to conventional linear pots and linear measurement systems using multiple gears and encoders LINARIX line are more durable and can be used to replace them directly avoiding common problems of slippage and wear. Draw wire sensors from POSITAL provide extremely precise measurements because of inherent accuracy of encoders while rugged construction ensures reliable performance even under extreme conditions.

Datasheet Download

Manual Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

POSITAL

POSITAL UCD – CANbus

  • Up to 16 bit resolution
  • CANopen and SAEJ1939 interfaces
  • Optional stainless steel and IP68/69k options
  • Custom SAEJ1939 messages available

POSITAL

AKS – CANbus

  • Single or dual axis
  • 360° (single), +/- 80° (dual)
  • CANopen, SAE J1939 interface
  • Ideal for dynamic applications

POSITAL

POSITAL 22mm Kit Encoder

  • 17bit SSI or BiSS-C output
  • Mounting options to make easy replacement of common optical encoders
  • Compact, economical
  • Battery-free multiturn

POSITAL

POSITAL CCD 50mm Hollow Shaft Kit Encoder

  • 50mm through hole diameter
  • Battery-freee multiturn
  • Low profile
  • Cable and connector options
Blog:

View Our Case Studies and Industries

Learn more about how Everight Position is helping to power leading technology in a variety of industries.

Sensors As Tough as You Are

If your environment is dirty, hot, wet, or corrosive your requirements may have some similarities with that of the construction industry.

TECHNOLOGY LINEAR SENSORS

Many applications require linear motion to be monitored for system control or to ensure safety. With lengths ranging from 1 m to 30m (3’ to 98’), LINARIX linear sensors are available in many configurations to meet an application’s requirements. Options include a wide variety of outputs (including analog, fieldbus and Ethernet variants), heavy duty housings and compact design.

Inductosyn: End of an Era, New Opportunities or Both?

Recently, obtaining the Inductosyn and components for maintenance has become more difficult. For decades the Inductosyn from Farrand Controls / Ruhle Companies sat near the top of the rotary sensor hierarchy. Providing sub 2 arcsec (0.5 mdeg) accuracies, it combined the robustness of a resolver with the performance of the best optical encoders. Despite its shortcomings, it found plenty of customers, from airborne infrared and radar systems, to telescopes, satellite communication antennae (SATCOM), machine tooling and low-pressure vacuum chambers.

Download Now

This field is for validation purposes and should be left unchanged.