POSITAL

LD0-C

Part no.: LD0-C

Key Features

• Compact housing

• CANopen and SAEJ1939 output available

• 1m to 30m measurement range options

• IP65

POSITAL’s LINARIX draw wire sensors measure linear motion by displacing a stainless steel wire wound around a wire drum that actuates the rotary encoder coupled to it via coupling. A spring is used to retract the wire in the housing. The encoder provides a proportional output. Measurements are highly accurate, reliable and the systems have very long lifetime

The LINARIX line offers a wide range of measurement lengths ranging from 1 m to 30 m [3 to 98 ft] and position output in almost every available industrial interface both analog and digital as well as incremental and absolute. The line is featured with different mechanical options, housing materials and springs to enable you to always find the most suitable product for your application

Compared to conventional linear pots and linear measurement systems using multiple gears and encoders LINARIX line are more durable and can be used to replace them directly avoiding common problems of slippage and wear. Draw wire sensors from POSITAL provide extremely precise measurements because of inherent accuracy of encoders while rugged construction ensures reliable performance even under extreme conditions.

Datasheet Download

Manual Download

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

POSITAL

POSITAL OCD – CANbus

  • Up to 16 bit resolution
  • CANopen
  • Many flange/shaft options for easy installation
  • Optional status LEDs for easy setup

POSITAL

POSITAL CCD 30mm Hollow Shaft Kit Encoder

  • 30mm through hole diameter
  • Battery-freee multiturn
  • Low profile
  • Cable and connector options

POSITAL

POSITAL UCD – Ethernet

  • Up to 16 bit resolution
  • Support for bus-in/bus-out daisy chaining
  • Optional stainless steel housings
  • Dianostic LEDs for easy setup

POSITAL

LD0-E

  • Compact housing
  • EtherNet/IP, Profinet, EtherCAT and other interfaces available
  • 1m to 30m measurement range options
  • IP65
Blog:

Everight Position: Elevating Solutions Beyond Distribution

In this dynamic landscape of technology and industrial solutions, Everight Position stands out not just as a distributor but as a strategic partner in your journey towards innovation and problem-solving. Let’s delve into the broader perspective of Everight, an entity that transcends the conventional role of a distributor.

Introduction to Intrinsically Safe Sensors

Intrinsically safe (IS) sensors are unable to produce a spark strong enough to cause ignition. Learn how this is accomplished and design considerations when using IS sensors.

Torque Measurement with Angle Sensors

As collaborative robots expand into manufacturing environments the issue of safe motion continues to be a concern. Current design approaches involve adding force sensors, torque sensors, and sometimes proximity sensors. These adders along with more complex software control algorithms mitigate most of the concerns and result in slower operation. Unfortunately, these additional sensors also add significant cost and complexity.

Custom-Off-The-Shelf: The New ‘COTS’ Goods

For decades there has been an initiative to source COTS (Commercial-off-the-shelf) goods when possible, and for good reason. COTS goods generally are less expensive, more readily available and easier to dual source.

Download Now

This field is for validation purposes and should be left unchanged.