Part no.: M100
• ATEX/IECEx approved for mining
• Sensor Mounting: In-Cylinder Mounting
• Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
• IP65 (connector) / IP67 (cable)
The intrinsically safe M100 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas.
Overall performance, repeat-ability and stability are outstanding over a wide temperature range. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the M100 provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.
The sensor is very rugged, being made of stainless steel with an inert fluoropolymer-sheathed probe and stainless steel target tube. The sensor is easy to install in cylinders and has a wide range of mechanical options. Environmental sealing is to IP65 or IP67 depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
"*" indicates required fields
Positek
Positek
Positek
Positek
Inductosyn vs Modern Rotary Encoders
An Inductosyn is type of inductive position sensing device from Farrand Controls/ Ruhle Companies. Inductosyns work using the same basic physics as a transformer using planner arrays of inductive windings.
What is a multiturn rotary encoder?
A multiturn rotary encoder is a sensor that measures the angle of rotation of a shaft, as well as the number of complete revolutions that the shaft has made. This is in contrast to a single-turn encoder, which only measures the angle of rotation, 0 – 360°. Multiturn encoders are used in a variety of applications where it is important to track the position of a moving object, such as in machine tools, robotics, and automation systems.
Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications between a master (i.g. controller) and a slave (i.g. sensor).
Improved Encoder Accuracy Brings Hidden Benefits
Capacitive rotary encoders such as those from Netzer Precision are known for their low profile, high noise immunity and excellent accuracy. As a result, they are an excellent choice for applications such as camera systems, radar, slip-rings and robotic joints. Often times in these tasks the encoder is used for velocity feedback, ensuring a smooth […]