Part no.: M133
• ATEX/IECEx approved for mining
• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
• Available in any measurement range from 0-51mm to 0-100mm(for 2-50mm range see P103)
• Sealed to IP65/67 depending on connector/cable option
The intrinsically safe M133 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a mid-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, being responsive along almost its entire length, and like all Positek sensors provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-51mm to 0-100mm and with full EMC protection built in.
Overall performance, repeatability and stability are outstanding over a wide temperature range.
The sensor has a rugged stainless steel body and plunger. It is easy to install and set up, mounting options include flange and body clamps. The plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The M133 also offers a wide range of mechanical options, environmental sealing is to IP65 or IP67 depending on selected cable or connector options.
Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.
The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.
"*" indicates required fields
Positek
Positek
Positek
Positek
Accuracy, Resolution and Repeatability
There are several key terms that are critical to specifying the optimal position sensor for a given application. This application note defines these key terms and how they relate to the sensor’s role in the overall system performance. It is important to consider that precision is very much a system issue and can be dominated by mechanical errors such as eccentricity. This paper discusses the most significant mechanical error for rotary applications (eccentricity) and presents eccentricity tolerant position sensor solutions.
Introduction to Intrinsically Safe Sensors
Intrinsically safe (IS) sensors are unable to produce a spark strong enough to cause ignition. Learn how this is accomplished and design considerations when using IS sensors.
Application Note: Rotary Encoders for Azimuth and Elevation Feedback in Vision Gimbals
Vision gimbals are critical components in various applications, including unmanned aerial vehicles (UAVs), robotics, and surveillance systems. Used in IR, LIDAR, visible light and other frequencies, they stabilize cameras or sensors, providing smooth and accurate footage or data acquisition regardless of platform movement.
Everight Position: Leading the Way in Hazardous Environment Solutions
Everight Position provides solutions tailored for hazardous environments. With our focus on customer well-being and reliability, we’re committed to equipping industries with sensors that are compliant to regulatory requirements.