E111

Positek

Part no.: E111

Key Features

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

The intrinsically safe E111 is ATEX and IECEx approved for use in potentially explosive gas/vapour and dust atmospheres. This heavy-duty version of the E101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the E111 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.

The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel. Environmental sealing is to IP65 or IP67, depending on selected cable or connector options.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

X103

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm (for 51-100mm range see P133)
Sealed to IP65/67 depending on connector/cable option

Positek

S125

Body Diameter: 40mm
Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
Available in any measurement angle from 0-5mm to 0-800mm
Sealed to IP68 350bar, 3500msw, 5000psi

Positek

Positek S508

Subsea encoder to 10 Bar, IP68, IP69K
Analog voltage and current outputs
Up to 0.1% linearity
Measure up to 160 deg range

Positek

H103

CSA approved to: Class I, Zone 0
Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm (for 51-100mm range see P133)
Sealed to IP65/67 depending on connector/cable option

View Our Case Studies and Industries

Learn more about how Everight Position is helping to power leading technology in a variety of industries.

‘Dirty Deeds Done Dirt Cheap’ – The Gill Blade Sensor

Not all sensors live easy lives. While some will go on to do noble things such as aiding in medical surgery robotics or will find lives in cutting-edge cobots such as Boston Dynamic’s spot, others will live simpler, yet equally important lives, this article is dedicated to one of those unsung heroes, the Gill Blade Sensor.

SSI Hardware

SSI hardware is fairly simple. Just use any RS-422 transceiver to generate the differential signals from/to the microcontroller port pins. Keep reading to learn about the different implementations of SSI hardware.

Custom-Off-The-Shelf: The New ‘COTS’ Goods

For decades there has been an initiative to source COTS (Commercial-off-the-shelf) goods when possible, and for good reason. COTS goods generally are less expensive, more readily available and easier to dual source.