E115

Positek

Part no.: E115

Key Features

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800m

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

The intrinsically safe 10 bar E115 is a heavy-duty ATEX and IECEx approved version of the E114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for applications whereIP68 sealing is required up to a pressure of 10Bar. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the E115 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.

The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, or an M8 stainless steel rod eye. The E115 also offers a wide range of mechanical and electrical options, environmental sealing is to IP68 10Bar.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

X130

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: In-cylinder
Available in any measurement range from 0-400mm to 0-1485mm
Sealed to IP65/67 depending on connector/cable option

Positek

P603

Single axis
Up to 160°
Voltage, Current or Ratiometric interface
IP67

Positek

E112

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
Available in any measurement range from 0-5mm to 0-50mm
Sealed to IP67

Positek

M103

ATEX/IECEx approved for mining
Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm (for 51-100mm range see P133)
Sealed to IP65/67 depending on connector/cable option

TECHNOLOGY LINEAR SENSORS

Many applications require linear motion to be monitored for system control or to ensure safety. With lengths ranging from 1 m to 30m (3’ to 98’), LINARIX linear sensors are available in many configurations to meet an application’s requirements. Options include a wide variety of outputs (including analog, fieldbus and Ethernet variants), heavy duty housings and compact design.

Dynamic Inclinometers

For applications where sudden movements, shocks, and vibrations are likely to be encountered, it is important to have sensors with fast response and a clean signal output. POSITAL’s dynamic inclinometers combine two measurement principles using two different MEMS sensors: a 3D acceleration sensor and a 3D gyroscope.

NEW PRODUCT – VLH-35 ELECTRIC ENCODER FOR DC SERVO MOTORS

Netzer Precision Position Sensors is introducing the VLH-35, a new product designed to meet the needs of the servo motor industry and its requirements for the next generation of industrial rotary motion control.

What is a multiturn rotary encoder?

A multiturn rotary encoder is a sensor that measures the angle of rotation of a shaft, as well as the number of complete revolutions that the shaft has made. This is in contrast to a single-turn encoder, which only measures the angle of rotation, 0 – 360°. Multiturn encoders are used in a variety of applications where it is important to track the position of a moving object, such as in machine tools, robotics, and automation systems.