Positek

H118

Part no.: H118

Key Features

• CSA approved to: Class I, Zone 0

• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available

• Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)

• Sealed to IP67

The intrinsically safe H118 is CSA approved for use in potentially explosive gas/vapour and dust atmospheres. The H118 is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a short-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, being responsive along almost its entire length, and like all Positek® sensors provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-2mm to 0-50mm and with full EMC protection built in. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor has a rugged stainless steel body and plunger. It is easy to install and set up, mounting options include flange and body clamps. The plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The H118 also offers a wide range of mechanical options, environmental sealing is to IP67.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

M112

  • ATEX/IECEx approved for mining
  • Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
  • Available in any measurement range from 0-5mm to 0-50mm
  • Sealed to IP67

Positek

S119

  • Body Diameter: 19mm
  • Sensor Mounting: M5 rod eyes or body clamps
  • Available in any measurement angle from 0-5mm to 0-800m
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

Positek S508

  • Subsea encoder to 10 Bar, IP68, IP69K
  • Analog voltage and current outputs
  • Up to 0.1% linearity
  • Measure up to 160 deg range

Positek

S125

  • Body Diameter: 40mm
  • Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 350bar, 3500msw, 5000psi
Blog:

Custom-Off-The-Shelf: The New ‘COTS’ Goods

For decades there has been an initiative to source COTS (Commercial-off-the-shelf) goods when possible, and for good reason. COTS goods generally are less expensive, more readily available and easier to dual source.

Application Note: Rotary Encoders for Azimuth and Elevation Feedback in Vision Gimbals

Vision gimbals are critical components in various applications, including unmanned aerial vehicles (UAVs), robotics, and surveillance systems. Used in IR, LIDAR, visible light and other frequencies, they stabilize cameras or sensors, providing smooth and accurate footage or data acquisition regardless of platform movement.

Dynamic Inclinometers

For applications where sudden movements, shocks, and vibrations are likely to be encountered, it is important to have sensors with fast response and a clean signal output. POSITAL’s dynamic inclinometers combine two measurement principles using two different MEMS sensors: a 3D acceleration sensor and a 3D gyroscope.

LVR, a Temperature Independent Alternative to LVDT’s in Harsh Environments

The LVR sensor (Linear Variable Resonance), is a new patented non-contact linear position sensor that is a potential replacement for the LVDT sensors in harsh environments.

Complete Posital Product Line

Click Here

Everight Position is dedicated to helping customers find the best solution for their positioning needs.™

©2020, Everight Position  |  Terms & Conditions

Speak directly to one of our experts! We’d love to hear all about your project and determine how Everight can help.

856-727-9500

Email: info@evrtp.com