P603

Positek

Part no.: P603

Key Features

• Single axis

• Up to 160°

• Voltage, Current or Ratiometric interface

• IP67

The P603 is an affordable, durable, high-accuracy tilt sensor designed for industrial and scientific feedback applications. The P603, like all Positek sensors, is supplied with the output calibrated to the angle required by the customer, between 15 and 160 degrees. The sensor provides a linear output characteristic with angle of deflection. There is a machined registration mark to identify the calibrated mid point.

It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important.
Overall performance, repeatability and stability are outstanding over a wide temperature range. Electrical connections to the sensor are made via an industrial standard 4-pin M12 connector, with limited rotational capability to facilitate cable routing.

The sensor has a rugged stainless steel body and anodised aluminum mounting flange. The flange has two 4.5mm by 30 degree wide slots on a 48mm pitch to simplify mounting and position adjustment. The P603 offers a range of electrical options. Sealing is to IP67 and full EMC protection is built in.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

P118

Body Diameter: 19mm
Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)
Sealed to IP67

Positek

X133

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
Available in any measurement range from 0-51mm to 0-100mm(for 2-50mm range see P103)
Sealed to IP65/67 depending on connector/cable option

Positek

M103

ATEX/IECEx approved for mining
Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm (for 51-100mm range see P133)
Sealed to IP65/67 depending on connector/cable option

Positek

P117

Body Diameter: 19mm
Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
Available in any measurement range from 0-5mm to 0-350mm
Sealed to IP67

The NEXTGen CANopen inclinometers

The NEXTGen CANopen inclinometers are available now! POSITAL has updated its family of TILTIX inclinometers with new three-axis MEMS accelerometers, enhanced firmware, and a new housing concept.

Position Sensors for Hazardous Locations

When choosing components for a hazardous environment it is important to have a trusted partner. For over a decade engineers have relied on Everight Position for rotary, linear and tilt sensors for these challenging applications.

Implementation of SSI Interface

Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications especially, rotary encoders. It is a point-to-point connection from a master (e.g. PLC, microcontroller or other control systems) to a slave (e.g. the rotary encoder).

Application Note: Ethernet Protocols for Industrial Automation Sensors

Industrial Ethernet protocols are playing a growing role in automation, as they offer a number of advantages over traditional fieldbus protocols such as CANopen and PROFIBUS. Industrial Ethernet protocols are based on standard Ethernet technology, which provides a number of benefits, including: