S623

Positek

Part no.: S623

Key Features

• Single axis

• Up to 160°

• Voltage, Current or Ratiometric interface

• IP67

The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623, like all Positek sensors, is supplied with the output calibrated to the angle required by the customer, between 15 and 160 degrees. The sensor provides a linear output characteristic with angle of deflection. There is a machined registration mark to identify the calibrated mid point.

It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as industrial machinery where cost is important.

Overall performance, repeatability and stability are outstanding over a wide temperature range. It is sealed to IP68 350bar (5000psi, 3500m depth).

The sensor has a rugged stainless steel body and mounting flange. The S623 offers a range of electrical options. Full EMC protection is built in.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

Positek G500

CSA rated for gas/vapor
0.5-9.5V or 4-20mA outputs
ATEX variants of P502, P505 and P520 available
Up to 160 deg range

Positek

G111

CSA approved to: Class I, Zone 0
Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
Available in any measurement range from 0-5mm to 0-800mm
Sealed to IP65/67 depending on connector/cable option

Positek

E112

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
Available in any measurement range from 0-5mm to 0-50mm
Sealed to IP67

Positek

G101

CSA approved to: Class I, Zone 0
Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
Sealed to IP65/67 depending on connector/cable option

Custom-Off-The-Shelf: The New ‘COTS’ Goods

For decades there has been an initiative to source COTS (Commercial-off-the-shelf) goods when possible, and for good reason. COTS goods generally are less expensive, more readily available and easier to dual source.

Expanded VLP Encoder Series Offers Control Engineers New Sensing Options

Everight Position is pleased to announce the addition of four new sizes of Netzer’s two-plate VLP rotary encoder amongst other improvements. Based on the success of the VLP-60 and VLP-100, the new options include the VLP-80, VLP-140, VLP-170 and VLP-247.

Wiegand Effect Energy Harvesting

The “Wiegand effect” was discovered almost fifty years ago and has been used successfully in several specialized applications. However, its full potential for energy harvesting and signal generation has received only limited recognition. With recent enhancements to the energy output from Wiegand devices and the emergence of a new generation of ultra-efficient electronic chips for wireless communications, the technology is showing significant promise, especially in the exciting new area of the Internet of Things (IoT). UBITO, a member of the FRABA Group of technology companies, is leading research and development projects aimed at fulfilling this promise.