Positek

P130

Part no.: P130

Key Features

• Body Diameter: 35mm

• Sensor Mounting: In-cylinder

• Available in any measurement range from 0-400mm to 0-1485mm

• Sealed to IP65/67 depending on connector/cable option

The P130 sensor is an affordable, durable, high accuracy long stroke linear position sensor specifically designed for use in hydraulic and pneumatic cylinders where long life and cost are important. The P130 linear sensor is particularly suitable for OEM customers who require good performance in hard environments such as industrial machinery.
Performance, repeatability and stability are outstanding over a large temperature range.This compact and particularly space efficient sensor is responsive along almost its entire length.

As with all of Positek’s sensors the customer can specify the exact length that they require to measure and Positek will manufacture the unit specifically for that length and supply the unit calibrated.

The P130 sensor is available with any length of electrical travel ranging anywhere from 0-400mm to 0-1485mm. For example, if your application requires 40″” (1016 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 1016 mm. The P130 is housed inside a stainless steel body and the probe coil is encased within a flouropolymer sheath, both of which offer good protection for this rugged sensor.

The sensor is easily installed in the cylinder using one of the thread options. The P130 is sealed to IP65 or IP67 depending on the selected cable or connector options.

The sensor has integrated EMC protection to EN 61000-6-2, EN 61000-6-3.

The P130 is well suited for high pressure hydraulic environments up to 350 bar and is rated over the temperature range -40°C to 125°C or -20° to +85° depending on the electronics option.

Call us for more info at 856 727 9500

You may also be interested in:

Positek

P101

  • Body Diameter: 35mm
  • Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • Sealed to IP65/67 depending on connector/cable option

Positek

G115

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800m
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

H100

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: In-Cylinder Mounting
  • Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
  • IP65 (connector) / IP67 (cable)

Positek

X120

  • ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
  • Sensor Mounting: M18 or 3/4" UNF threadTarget tube flanges available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 350bar, 3500msw, 5000psi(combined hydraulic and water pressure)
Blog:

Liquid Level Sensor Interface

The GS liquid level software is an excellent resource for people using sensors to measure fuel, chemicals, or even waste. One of the best features of the Gill Liquid Level Sensors is its compatibility with the GS Level software. The GS Level software makes it easy for the end-user or integrator to change the setting […]

View Our Case Studies and Industries

Learn more about how Everight Position is helping to power leading technology in a variety of industries.