G005

Positek

Part no.: G005

Key Features

• Provides isolation between the amplifier power supply, the hazardous area and the G005 output signal

• Input power supply range of 12 to 30 volts DC

• Factory configured to either 0.5 to 9.5V or 4-20mA

• Bandwidth of 4.7kHz, making it ideal for servo control loops.

The G005 Galvanic Isolation Amplifier has been designed specifically for use with Positek Intrinsically Safe position sensors in hazardous Zone 0, 20 Class I, II & III applications and is certified; [Ex ia IIC] [AEx ia IIC] [AEx iaD IIIC]. The Amplifier sacles the output in the safe area and ensures the corresponding output is correct over a wide range of input voltages. It also supports a 5-wire installation option which can negate the effect of losses over long distances, thus maintaining the output signal accuracy. The X005 is factory configured to either 0.5 to 9.5V or 4-20mA and has a bandwidth of 4.7kHz.

Datasheet Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

X120

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: M18 or 3/4" UNF threadTarget tube flanges available
Available in any measurement angle from 0-5mm to 0-800mm
Sealed to IP68 350bar, 3500msw, 5000psi(combined hydraulic and water pressure)

Positek

E118

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)
Sealed to IP67

Positek

H115

CSA approved to: Class I, Zone 0
Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
Available in any measurement angle from 0-5mm to 0-800m
Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

M101

ATEX/IECEx approved for mining
Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
Sealed to IP65/67 depending on connector/cable option

Application Note: Ethernet Protocols for Industrial Automation Sensors

Industrial Ethernet protocols are playing a growing role in automation, as they offer a number of advantages over traditional fieldbus protocols such as CANopen and PROFIBUS. Industrial Ethernet protocols are based on standard Ethernet technology, which provides a number of benefits, including:

Submersible Linear Sensors

Positek’s portfolio includes a range of high-accuracy linear sensors specifically designed for use in submersible applications. Made from marine grade stainless steel and offering the reliability that is not possible from a submersible LVDT or linear potentiometer, our sensors have served a host of different industries such as wastewater and offshore oil drilling. Another use […]