E101

Positek

Part no.: E101

Key Features

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available

• Any stroke from 0-5mm to 0-800mm (e.g. 305mm)

• Sealed to IP65/67 depending on connector/cable option

The intrinsically safe E101 is ATEX and IECEx approved for use in potentially explosive gas/vapour and dust atmospheres. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The unit is highly compact and space-efficient, being responsive along almost its entire length.

The E101, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in. The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.

Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including M5 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M5 thread, an M5 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel. Environmental sealing is to IP65 or IP67, depending on selected cable or connector options.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

E603

Single axis
Up to 160°
Voltage or Current interface
IP67

Positek

X120

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: M18 or 3/4" UNF threadTarget tube flanges available
Available in any measurement angle from 0-5mm to 0-800mm
Sealed to IP68 350bar, 3500msw, 5000psi(combined hydraulic and water pressure)

Positek

G100

CSA approved to: Class I, Zone 0
Sensor Mounting: In-Cylinder Mounting
Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
IP65 (connector) / IP67 (cable)

Positek

M103

ATEX/IECEx approved for mining
Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available
Available in any measurement range from 0-2mm to 0-50mm (for 51-100mm range see P133)
Sealed to IP65/67 depending on connector/cable option

NetzerUSA.com – Your Resource for Innovative Rotary Encoders

Everight Position, a leading resource for rotary encoders is excited to announce the launching of NetzerUSA.com , an online resource dedicated to empowering control engineers in the United States.

SSI Hardware

SSI hardware is fairly simple. Just use any RS-422 transceiver to generate the differential signals from/to the microcontroller port pins. Keep reading to learn about the different implementations of SSI hardware.

Food and Beverage Grade Sensors

Safety, hygiene, and accuracy are critical in food and beverage production and packaging. While sensors can help to achieve the necessary level of accuracy and efficiency, their requirements must extend far beyond the traditional specs of resolution and communication interface. Fortunately, Everight offers a variety of products that meet these needs.

Understanding Hazardous Location Classifications

Properly understanding hazardous location classifications is vital for ensuring safety in dangerous environments. This blog provides a comprehensive guide to these classifications and their importance.