POSITAL

LD0-E

Part no.: LD0-E

Key Features

• Compact housing

• EtherNet/IP, Profinet, EtherCAT and other interfaces available

• 1m to 30m measurement range options

• IP65

POSITAL’s LINARIX draw wire sensors measure linear motion by displacing a stainless steel wire wound around a wire drum that actuates the rotary encoder coupled to it via coupling. A spring is used to retract the wire in the housing. The encoder provides a proportional output. Measurements are highly accurate, reliable and the systems have very long lifetime

The LINARIX line offers a wide range of measurement lengths ranging from 1 m to 30 m [3 to 98 ft] and position output in almost every available industrial interface both analog and digital as well as incremental and absolute. The line is featured with different mechanical options, housing materials and springs to enable you to always find the most suitable product for your application

Compared to conventional linear pots and linear measurement systems using multiple gears and encoders LINARIX line are more durable and can be used to replace them directly avoiding common problems of slippage and wear. Draw wire sensors from POSITAL provide extremely precise measurements because of inherent accuracy of encoders while rugged construction ensures reliable performance even under extreme conditions.

Call us for more info at 856-727-9500

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

POSITAL

POSITAL UCD – Ethernet

  • Up to 16 bit resolution
  • Support for bus-in/bus-out daisy chaining
  • Optional stainless steel housings
  • Dianostic LEDs for easy setup

POSITAL

POSITAL OCD – Ethernet

  • Up to 16 bit resolution
  • EtherNet/IP, ProfiNET, EtherCAT and MODBUS TCP/IP options
  • Many flange/shaft options for easy installation
  • Dianostic LEDs for easy setup

POSITAL

POSITAL CCD 30mm Hollow Shaft Kit Encoder

  • 30mm through hole diameter
  • Battery-freee multiturn
  • Low profile
  • Cable and connector options

POSITAL

POSITAL UCD – SSI

  • Up to 16 bit resolution
  • Available in most common SSI formats
  • Optional stainless steel and IP68/69k options
  • Fast delivery to support MRO
Blog:

MEMS Inclinometer Specifications

Inclinometers, also called tilt sensors, clinometers, or slope sensors, are designed to measure the angle of an object with respect to the force of gravity. These tilt or level meters determine the pitch and/or roll angle and output these values via the appropriate electrical interface.

Accuracy, Resolution and Repeatability

There are several key terms that are critical to specifying the optimal position sensor for a given application. This application note defines these key terms and how they relate to the sensor’s role in the overall system performance. It is important to consider that precision is very much a system issue and can be dominated by mechanical errors such as eccentricity. This paper discusses the most significant mechanical error for rotary applications (eccentricity) and presents eccentricity tolerant position sensor solutions.

Implementation of SSI Interface

Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications especially, rotary encoders. It is a point-to-point connection from a master (e.g. PLC, microcontroller or other control systems) to a slave (e.g. the rotary encoder).

TECHNOLOGY LINEAR SENSORS

Many applications require linear motion to be monitored for system control or to ensure safety. With lengths ranging from 1 m to 30m (3’ to 98’), LINARIX linear sensors are available in many configurations to meet an application’s requirements. Options include a wide variety of outputs (including analog, fieldbus and Ethernet variants), heavy duty housings and compact design.