P106

Positek

Part no.: P106

Key Features

• Probe Head Diameter: 20mmElectronics Module: 35mm

• Sensor Mounting: In-cylinder

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

The P106 Inductive Linear Position Sensor is an in cylinder with external electronics. It is a highly accurate, durable and affordable position sensor designed for demanding hydraulic or pneumatic cylinder position feedback applications where environmental resistance, cost and service life are particularly important. It is particularly suited to OEM customers who require good sensor performance where the internal length or diameter is limited.

The repeatability, stability and overall performance are outstanding over a large temperature range. The P106 LIPS is very compact and space efficient, being responsive along almost its entire length.

Like all Positek sensors the P106 provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, the P106 is available with any travel from 0-5mm to 0-800mm, for example, if your application requires 10″” (254 mm) measurement then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 254 mm.

Manufactured from stainless steel with an inert fluoropolymer sheathed probe the P106 is rugged, ideal for cylinder based applications. The probe and target are easy to install, as is the external electronics module which has a range of mounting and electrical options. Sealing to IP65 or IP67 dependent on cable or connector options and with integrated full EMC protection.

Datasheet Download

Part Builder

Drawing Download

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

M100

ATEX/IECEx approved for mining
Sensor Mounting: In-Cylinder Mounting
Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
IP65 (connector) / IP67 (cable)

Positek

X115

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available
Available in any measurement angle from 0-5mm to 0-800m
Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

M101

ATEX/IECEx approved for mining
Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available
Any stroke from 0-5mm to 0-800mm (e.g. 305mm)
Sealed to IP65/67 depending on connector/cable option

Positek

E114

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
Available in any measurement angle from 0-5mm to 0-800mm
Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Position Sensors for Hazardous Locations

When choosing components for a hazardous environment it is important to have a trusted partner. For over a decade engineers have relied on Everight Position for rotary, linear and tilt sensors for these challenging applications.

Why Holistic Encoders are More Accurate

All absolute rotary encoders have a rotor which is attached to the rotating shaft and a stator which is attached to the housing holding the shaft. The interaction of these two components produces a measure of the shafts rotational angle. The most important parameters of absolute rotary sensors are resolution, accuracy and tolerance to misalignment of the rotational axes.

How-to: 2 Point Operation of an Open Collector Switch Output

In this example, the switch point has been set to ‘Full Alarm’. By setting the switch point to 90% with an 80% hysteresis, the switch will come on at 90% and switch off at 10%.

Intrinsically Safe Absolute Rotary Encoders

In the most hazardous environments, where an explosive atmosphere consisting of flammable gas or vapor is regularly present and a sensor fault cannot be risked, Intrinsically Safe (IS) sensors may be the best sensing option. Generally, these sensors are paired with a barrier which limits the amount of electrical and thermal energy that can enter the Hazardous Area to an amount that is so small that even in the situation of a sensor fault, there is not enough energy to cause an ignition.