Positek

Positek S508

Part no.: Positek S508

Key Features

• Subsea encoder to 10 Bar, IP68, IP69K

• Analog voltage and current outputs

• Up to 0.1% linearity

• Measure up to 160 deg range

The 10 Bar S508 rotary sensor is an affordable, durable, high-accuracy sensor designed for Marine and Subsea feedback applications. It is well suited for OEM’s seeking good performance for arduous applications such as industrial machinery where cost is important. Overall performance, repeatability and stability are outstanding over a wide temperature range. The S508 has a long service life and environmental resistance with a rugged 316 stainless steel body.

The S520, like all Positek® sensors, is supplied with the output calibrated to the angle required by the customer, between 15 and 160 degrees and with full EMC protection built in. The sensor provides a linear output proportional with angle of rotation. There is a machined registration mark to identify the calibrated mid point.

It is particularly suitable for OEMs seeking good sensor performance for arduous applications such as subsea ROVs where long term reliability and excellent sealing is important.

Overall performance, repeatability and stability are outstanding over a wide temperature range.

The S520 has long service life and environmental resistance with a rugged 316 stainless steel body and shaft, The flange mounting makes the sensor easy to install. There are a range of electrical options.
Environmental sealing is to IP68 350Bar, 3500 msw, 5000 psi.

Datasheet Download

Part Builder

Manufacturer Website

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

S114

  • Body Diameter: 35mm
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

S120

  • Body Diameter: 40mm
  • Sensor Mounting: M18 or 3/4" UNF threadTarget tube flanges available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 350bar, 3500msw, 5000psi(combined hydraulic and water pressure)

Positek

H112

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger
  • Available in any measurement range from 0-5mm to 0-50mm
  • Sealed to IP67

Positek

P106

  • Probe Head Diameter: 20mmElectronics Module: 35mm
  • Sensor Mounting: In-cylinder
  • Available in any measurement range from 0-5mm to 0-800mm
  • Sealed to IP65/67 depending on connector/cable option
Blog:

Technical Note: Intrinsically Safe vs. Inherently Safe Sensors

Intrinsically safe (IS) sensors are designed to operate safely in hazardous areas where there is a risk of explosion. IS sensors limit the amount of electrical and thermal energy that can be released in the event of a fault, to a level below that which is capable of igniting flammable gases, vapors, or dust.

Tiny Tech, Big Impact: Rotary Encoders Are a Critical Link the Agrobot Revolution

A recent GlobalData report highlights the impressive growth of the robotics industry in agriculture (reaching $218 billion by 2030), a key component behind this revolution often goes unnoticed: the rotary encoder. These unsung heroes convert rotational motion into precise electrical signals, playing a vital role in ensuring the smooth, accurate movements of agricultural robots.

NASA Lunabotics Challenge

Nearly fifty University Teams recently gathered in Florida for the NASA Lunabotics Challenge. The robots are tasked with driving, digging, and depositing regolith—the fragmented rock material that covers the moon’s surface—in a lunar simulant. Beyond robotics and mechatronics, the program teaches team work, project management and industry collaboration.

How To: Use an Open Collector Output

All new Gill level sensors come with a secondary output function which operates as a high or low level switch. So what is it and how do I use an Open Collector switch output?

Download Now

This field is for validation purposes and should be left unchanged.