Positek

E115

Part no.: E115

Key Features

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800m

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

The intrinsically safe 10 bar E115 is a heavy-duty ATEX and IECEx approved version of the E114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for applications whereIP68 sealing is required up to a pressure of 10Bar. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the E115 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.

The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including stainless steel M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, or an M8 stainless steel rod eye. The E115 also offers a wide range of mechanical and electrical options, environmental sealing is to IP68 10Bar.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier . Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Call us for more info at

"*" indicates required fields

Hi, My name is

and I’m interested in the

You can reach me by email at

or phone at

Message

This field is for validation purposes and should be left unchanged.
You may also be interested in:

Positek

M114

  • ATEX/IECEx approved for mining
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

G114

  • CSA approved to: Class I, Zone 0
  • Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
  • Available in any measurement angle from 0-5mm to 0-800mm
  • Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Positek

Positek X500

  • ATEX/IECE: Ex II 1G; Ex ia IIC T4 GA
  • 0.5-9.5V or 4-20mA outputs
  • ATEX variants of P502, P505 and P520 available
  • Up to 160 deg range

Positek

M118

  • ATEX/IECEx approved for mining
  • Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
  • Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)
  • Sealed to IP67
Blog:

Food and Beverage Grade Sensors

Safety, hygiene, and accuracy are critical in food and beverage production and packaging.  While sensors can help to achieve the necessary level of accuracy and efficiency, their requirements must extend far beyond the traditional specs of resolution and communication interface. Fortunately, Everight offers a variety of products that meet these needs.

Potentiometers That Make Sense for Sensing

Despite their perceived simplicity, potentiometers can still be an appropriate option in today’s ever-complicated automation industry. Fundamentally a variable resistor, modern potentiometers also offer more traditional outputs such as voltage and current which are common to more expensive sensors.

Exploring the Robust Nature of Rugged Inclinometers

While they may be small, the role of rotary encoders in spacecraft is vital, demanding a balance between performance, reliability, and the unforgiving environment of space. From NASA’s Robonaut II to automated material handling systems on the International Space Station, Everight has worked with engineers to put rotary encoders into ‘the final frontier.’

Safety First – Selecting the Right Position Sensors for Safety-Related Motion Control

POSITAL has introduced an inexpensive and flexible alternative for safety-critical motion control systems. When combined with functional safety PLCs, these devices are suitable for applications that are required to conform to Performance Level/ PL d, Cat. 3, according to ISO 13849.

Download Now

This field is for validation purposes and should be left unchanged.