G118

Positek

Part no.: G118

Key Features

• CSA approved to: Class I, Zone 0

• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available

• Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)

• Sealed to IP67

The intrinsically safe G118 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G118 is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a short-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, being responsive along almost its entire length, and like all Positek® sensors provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-2mm to 0-50mm and with full EMC protection built in. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor has a rugged stainless steel body and plunger. It is easy to install and set up, mounting options include flange and body clamps. The plunger can be supplied free or captive, with female M4 thread, or spring-loaded with a ball end. The G118 also offers a wide range of mechanical options, environmental sealing is to IP67.

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier. Approved galvanic isolation amplifiers (G005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

Datasheet Download

Part Builder

Drawing Download

Manufacturer Website

Call us for more info at 856-727-9500

"*" indicates required fields

You may also be interested in:

Positek

M133

ATEX/IECEx approved for mining
Sensor Mounting: Flange or body clampsSpring loaded pushrod option available
Available in any measurement range from 0-51mm to 0-100mm(for 2-50mm range see P103)
Sealed to IP65/67 depending on connector/cable option

Positek

X106

ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)
Sensor Mounting: In-cylinder
Available in any measurement range from 0-5mm to 0-800mm
Sealed to IP65/67 depending on connector/cable option

Positek

P111

Body Diameter: 35mm
Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available
Available in any measurement range from 0-5mm to 0-800mm
Sealed to IP65/67 depending on connector/cable option

Positek

H114

CSA approved to: Class I, Zone 0
Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available
Available in any measurement angle from 0-5mm to 0-800mm
Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Why Holistic Encoders are More Accurate

All absolute rotary encoders have a rotor which is attached to the rotating shaft and a stator which is attached to the housing holding the shaft. The interaction of these two components produces a measure of the shafts rotational angle. The most important parameters of absolute rotary sensors are resolution, accuracy and tolerance to misalignment of the rotational axes.

Celera Motion Unveils New Ultra-Lightweight Inductive Encoder

BEDFORD, Mass. (Nov. 14, 2023) — Celera Motion, an award-winning business unit of Novanta Inc., announced today a new version of its popular ultra-lightweight IncOder CORE inductive encoder series.

Inductosyn vs Modern Rotary Encoders

An Inductosyn is type of inductive position sensing device from Farrand Controls/ Ruhle Companies. Inductosyns work using the same basic physics as a transformer using planner arrays of inductive windings.