X133

The intrinsically safe X133 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a mid-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, being […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available

• Available in any measurement range from 0-51mm to 0-100mm(for 2-50mm range see P103)

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


M100

The intrinsically safe M100 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous […]

• ATEX/IECEx approved for mining

• Sensor Mounting: In-Cylinder Mounting

• Any stroke from 0-5mm to 0-800mm (e.g. 305mm)

• IP65 (connector) / IP67 (cable)

Call to see if this sensor is right for your application! 856 727 9500


M101

The intrinsically safe M101 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The unit is highly compact and space-efficient, being responsive along almost […]

• ATEX/IECEx approved for mining

• Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 Threads Spring loaded pushrod option available

• Any stroke from 0-5mm to 0-800mm (e.g. 305mm)

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


M103

The intrinsically safe M103 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a short-bodied sensor is required for operation in hazardous areas. The unit is […]

• ATEX/IECEx approved for mining

• Sensor Mounting: Flange or Body Clamps Spring loaded pushrod option available

• Available in any measurement range from  0-2mm to 0-50mm (for 51-100mm range see P133)

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


M111

The intrinsically safe M111 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. This heavy-duty version of the M101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between […]

• ATEX/IECEx approved for mining

• Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 Threads Spring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


M112

The intrinsically safe M112 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The M112, like all Positek sensors, provides a […]

• ATEX/IECEx approved for mining

• Sensor Mounting: 1/2" UNF Thread Spring loaded plunger

• Available in any measurement range from 0-5mm to 0-50mm

• Sealed to IP67

Call to see if this sensor is right for your application! 856 727 9500


M114

The intrinsically safe 10 bar M114 is an ATEX and IECEx approved affordable, durable, high-accuracy position sensor. The M114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built […]

• ATEX/IECEx approved for mining

• Sensor Mounting: M5 rod eyes, body clamps or M5 threads Spring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 10bar, 100msw, 145psi (for 350bar sealing see S125)

Call to see if this sensor is right for your application! 856 727 9500


M115

The intrinsically safe 10 bar M115 is a heavy-duty ATEX and IECEx approved version of the M114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy […]

• ATEX/IECEx approved for mining

• Sensor Mounting: M8 rod eyes, body clamps or M8 threads Spring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800m

• Sealed to IP68 10bar, 100msw, 145psi (for 350bar sealing see S125)

Call to see if this sensor is right for your application! 856 727 9500


M117

The intrinsically safe M117 is ATEX and IECEx approved for use in potentially explosive gas/vapour, dust atmospheres and mining environments. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Overall performance, repeatability and stability are outstanding over a wide temperature […]

• ATEX/IECEx approved for mining

• Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 Threads Spring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-350mm

• Sealed to IP67

Call to see if this sensor is right for your application! 856 727 9500


X130

The intrinsically safe X130 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Overall performance, repeat-ability […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: In-cylinder

• Available in any measurement range from 0-400mm to 0-1485mm

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


X125

The intrinsically safe X125 sealed to IP68 350bar (5000psi, 3500m), is an ATEX and IECEx gas approved linear sensor . With a strong 12.6mm push rod it is recommended for applications where high pressure sealing is required or where vibration is an issue or there is a need for longer travel sensors are to be […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 350bar, 3500msw, 5000psi

Call to see if this sensor is right for your application! 856 727 9500


X103

The intrinsically safe X103 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a short-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, being […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: Flange or Body ClampsSpring loaded pushrod option available

• Available in any measurement range from  0-2mm to 0-50mm (for 51-100mm range see P133)

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


X106

The intrinsically safe X106 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for demanding hydraulic or pneumatic cylinder position feedback applications where service life, environmental resistance and cost are important and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Overall performance, repeatability […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: In-cylinder

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


X111

The intrinsically safe X111 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. This heavy-duty version of the X101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes. It remains […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 Rod Eyes, Body Clamps or M8 ThreadsSpring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-800mm

• Sealed to IP65/67 depending on connector/cable option

Call to see if this sensor is right for your application! 856 727 9500


X112

The intrinsically safe X112 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for gauge head positioning in industrial and scientific applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. The X112, like all Positek sensors, provides a linear output proportional to […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: 1/2" UNF ThreadSpring loaded plunger

• Available in any measurement range from 0-5mm to 0-50mm

• Sealed to IP67

Call to see if this sensor is right for your application! 856 727 9500


X114

The intrinsically safe 10 bar X114 is an ATEX and IECEx approved affordable, durable, high-accuracy position sensor. The X114, like all Positek sensors, provides a linear output proportional to displacement. Each unit is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M5 rod eyes, body clamps or M5 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Call to see if this sensor is right for your application! 856 727 9500


X115

The intrinsically safe 10 bar X115 is a heavy-duty ATEX and IECEx approved version of the X114 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors are to be mounted horizontally between rod eyes. It remains an affordable, durable, high-accuracy […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M8 rod eyes, body clamps or M8 threadsSpring loaded pushrod option available

• Available in any measurement angle from 0-5mm to 0-800m

• Sealed to IP68 10bar, 100msw, 145psi(for 350bar sealing see S125)

Call to see if this sensor is right for your application! 856 727 9500


X117

The intrinsically safe X117 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. It is designed for industrial and scientific feedback applications and is ideal for OEMs seeking good sensor performance for arduous applications in hazardous areas. Overall performance, repeatability and stability are outstanding over a wide temperature range. The unit is […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M5 Rod Eyes, Body Clamps or M5 ThreadsSpring loaded pushrod option available

• Available in any measurement range from 0-5mm to 0-350mm

• Sealed to IP67

Call to see if this sensor is right for your application! 856 727 9500


X118

The intrinsically safe X118 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. The X118 is designed for a wide range of industrial applications and is ideal for OEMs seeking good sensor performance in situations where a short-bodied sensor is required for operation in hazardous areas. The unit is compact and space-efficient, […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: Flange or body clampsSpring loaded pushrod option available

• Available in any measurement range from 0-2mm to 0-50mm(for 51-100mm range see P138)

• Sealed to IP67

Call to see if this sensor is right for your application! 856 727 9500


X120

The 350bar X120 is an ATEX and IECEx approved version of the S120 cylinder sensor. The X120 is sealed for a maximum of 350bar combined hydraulic and water pressure. The unit is compact, space-efficient and responsive along almost its entire length. Like all Positek sensors, the X120 provides a linear output proportional to displacement. Each […]

• ATEX/IECEx approved to: Ex II 1G : Ex ia IIC T4 GA (Ta = -40°C to +80°C)

• Sensor Mounting: M18 or 3/4" UNF threadTarget tube flanges available

• Available in any measurement angle from 0-5mm to 0-800mm

• Sealed to IP68 350bar, 3500msw, 5000psi(combined hydraulic and water pressure)

Call to see if this sensor is right for your application! 856 727 9500