In this example, the switch point has been set to ‘Full Alarm’. By setting the switch point to 90% with an 80% hysteresis, the switch will come on at 90% and switch off at 10%.

Robonaut 2 (R2) is a state-of-the-art, highly dexterous anthropomorphic robot. The robot is designed to work with humans and has the ability to use the same workspace and tools.

The robot joints incorporate dual encoders for position and torque feedback while performing in a dynamic application, vibration, shocks, and wide temperature range.

For maximum endurance and payload transportation capacity many UAV manufacturers turn to ICE (Internal Combustion Engine) powered flight. Electric propulsion has its place, but for maximum energy density batteries are not currently at the level of modern fossil fuels.

Intrinsically safe sensors and systems are used to provide a safe operating environment for personnel and equipment. They do this by restricting the electrical energy transmitted into a hazardous area.

For applications where sudden movements, shocks, and vibrations are likely to be encountered, it is important to have sensors with fast response and a clean signal output. POSITAL’s dynamic inclinometers combine two measurement principles using two different MEMS sensors: a 3D acceleration sensor and a 3D gyroscope.

All new Gill level sensors come with a secondary output function which operates as a high or low level switch. So what is it and how do I use an Open Collector switch output?